Sawdust dryer can quickly dehydrate the sawdust with high water content by about 15% to meet the requirements of particle production. The main drying machine is equipped with a high-speed rotating crushing device, which increases the touch area between the material and the drying medium. Some unique designs inside the equipment make the material not easy to stick to the operating board and the cylinder wall. The thermal efficiency is much higher than the general drum dryer.
Kolev sawdust dryer using drum + air drying, than the traditional simple air flow or simple drum drying effect is better, higher thermal efficiency, greater output.
The heat conduction tube is used to heat the material indirectly, so that the material and the heat source can fully touch, and the water steam can be discharged from the top of the equipment in real time. The heat source is heated by the hot blast stove without using steam.
The design of heat source can effectively avoid the situation of fire caused by a large amount of heat energy entering the drum in emergencies, and the operation is safer.
Advanced dust removal and purification technology, high efficiency of supporting dust collector, less power consumption.
| Specifications and Models | Handling Capacity（t/h) | Finished Product Moisture（%） | Power(KW) |
| KLF-TH1216 | 1-3 | ＜2±1 | 4 |
| KLF-TH1630 | 3-5 | ＜2±1 | 4 |
| KLF-TH2240 | 8-10 | ＜2±1 | 4 |
| KLF-TH2460 | 10-15 | ＜2±1 | 7.5 |
| KLF-TH2660 | 15-20 | ＜2±1 | 15 |
| KLF-TH2870 | 25-30 | ＜2±1 | 18.5 |
| KLF-TH3080 | 30-40 | ＜2±1 | 22 |
| KLF-TH3290 | 40-50 | ＜2±1 | 45 |
| KLF-TH3390 | 50-60 | ＜2±1 | 55 |
| KLF-TH3610 | 70-80 | ＜2±1 | 75 |
| The above parameters are for reference only. For more details, please contact customer service | |||
.jpg "Sawdust Dryer")
.jpg "Sawdust Dryer")
