Sludge Dryer Sludge Dryer Sludge Dryer Sludge Dryer
Sludge Dryer Sludge Dryer Sludge Dryer Sludge Dryer

Sludge Dryer

  • Capacity: 5-100t/h
  • Output moisture: Adjustable
  • Applicable materials: sludge, Coal slime, peat, raw coal, flotation cleaned coal, paste coal, mixed cleaned coal, blast furnace slag, coking and other secondary coal slime.
Online Chat

Applicable Material

Strong anti - overload capacity, large processing capacity, less fuel consumption, low drying cost

In view of the Sludge with high moisture, high viscosity, high water holding capacity and many other adverse drying conditions, Henan Kolev Machinery new generation sludge dryer using new feeding, discharging device, prevent to the roller dryer feeding clogging, discontinuous, uneven and material return phenomenon, reduce the dust removal system load.

Product Features

01

High degree of continuous automation

The industrialization, continuity and automation of coal slime drying have been realized by using a new type of non-power crushing device.

02

Upgraded version of internal structure, large processing capacity

The use of downflow mode, unique inlet and outlet device, new internal structure, can change the operation parameters according to different material properties and finished product requirements, its strong load resistance, large handling capacity, less fuel consumption, low drying cost.

03

Energy saving, environmental protection and high efficiency

Enhanced dust removal device, a variety of heat sources to meet the environmental requirements of different areas.

04

Simple structure and stable performance

Aligning tugboat design, achieve

Working Principle

Sludge dryer has a certain viscosity, in the drying process of sludge dryer into the dryer after the following work areas: guide area, cleaning area, inclined lifting plate area, discharge area. Wet sludge into the guide material area and hot air touched after evaporation of a large amount of water, then into the cleaning area; The lifting plate make the material form curtain state, cleaning area is provided with a cleaning device, can quickly clean off the sludge bonding cylinder wall, in this process, can also be broken pellet agglomeration, increase the heat exchange area, improve the drying rate; After drying the finished product moisture standard, into the final discharge area; The material rolls to the discharge port to complete the whole drying process.
Working Principle Img

Technical Parameter

product standard(m) Capacity(t/h) Feed moisture(%) Final Moisture(%) Reducer number Mounting inclination(°) Power(KW)
0.8*8 0.5-3 30% 15%-1% ZQ250 1.5-3 3kw
1*10 1—5 30% 15%-1% ZQ250 1.5-3 5.5KW
1.2*12 2_8 30% 15%-1% ZQ350 1.5-3 11KW
1.6*16 6_10 30% 15%-1% ZQ400 1.5-3 15KW
1.8*16 8—15 30% 15%-1% ZQ400 1.5-3 18.5kw
2*18 10—20 30% 15%-1% ZQ500 1.5-3 22kw
2.2*18 12—25 30% 15%-1% ZQ650 1.5-3 30kw
2.4*22 15—30 30% 15%-1% ZQ650 1.5-3 45kw
2.6*24 18—35 30% 15%-1% ZQ850 1.5-3 55kw
2.8*26 20—40 30% 15%-1% ZQ850 1.5-3 75kw
3*28 25—50 30% 15%-1% ZQ850 1.5-3 90kw
3.2*28 30-60 30% 15%-1% ZSY315 1.5-3 110kw
3.4*30 35-70 30% 15%-1% ZSY355 1.5-3 132kw
3.6*32 40-80 30% 15%-1% ZSY400 1.5-3 160kw
3.8*32 50-100 30% 15%-1% ZSY450 1.5-3 185kw
Henan Kolev Equipment Technology Co., Ltd
Henan Kolev Equipment Technology Co., Ltd
whatsapp wechat
The company is located in No. 145, Industrial Road West Section, Shangjie District, Zhengzhou City, covering an area of more than 15,000 square meters.

Username

Email

WhatsApp

Message

Submit